x2
click
9
Remove the glass HEPA
filters from their protective
packaging and push into the
shrouds until secure.
Use both hands to lift the
appliance out of the box, taking
care to hold by the base of the
appliance only.
Do not lift out by the
amplifier loop.
Take the carbon filters out
of the box and remove the
protective packaging.
Attach both carbon filters to
the appliance.
Position the shrouds onto the base
and push gently until they click
securely into place.
Place the remote control on the top
of the appliance with the buttons
facing down.
Plug in and switch on.
Assembly
To Next Page
Loading...
