Dyson Pure Cool TP04 Operating Manual

x2
x2
x2
x2
clik
clik
x2
x2
x2
x2
clik
clik
x2
x2
x2
x2
clik
clik
1 2 3
clik
x2
clik
x2
x2
x2
clik
x2
clik
x2
x2
x2
22
Changing the carbon filters
To remove the carbon filters:
pull the tabs on both sides of
the filters.
Dispose of the carbon filters in
the bin.
The shrouds will release with the
glass HEPA filters attached.
Unplug the appliance from
the mains electricity supply.
Slide the buttons down on
both sides of the shrouds.
Important: Always unplug the
appliance before changing filters.
The remaining filter life is shown in
the display and will indicate when
the non-washable carbon filter
needs replacing.
Dispose of used filter units in
accordance with local regulations.

Dyson Pure Cool TP04 Specifications

General

Type	Tower
Filter Type	HEPA and Activated Carbon
Air Multiplier Technology	Yes
Oscillation	350 degrees
Wi-Fi Connectivity	Yes
Fan Speed	10 settings
Night Mode	Yes
Display	LCD
App Compatibility	Dyson Link App
Air Projection	Yes
Filter Life	Up to 12 months
Voltage	120V
Voice Control	Yes
Room Size	Up to 81 m²
Power Consumption	40 W