25
Troubleshooting
If the appliance has been used
without a filter in place or the filters
have not been changed when
prompted, blockages may occur.
For further information and
support:
Online:
SA: www.sa.dyson.com/support
UAE: www.dyson.ae/support
On the phone:
SA: 90024440000
UAE: 800 Jumbo (58626)
To remove a blockage:
Remove the filter shrouds and
look for blockages in the air
inlet holes under the filters.
Use a soft brush to remove dust
and debris.
If an error code is displayed,
first try unplugging the
appliance and plugging it
in again.
If an error code continues
to be displayed, contact the
Dyson Helpline.
To Next Page
Loading...
