24
39 Important: ensure both the Upper and Lower retention rings and all six tension springs are
located correctly around the top and bottom of the motor bucket assembly.
Failure to do so will result in a failed repair.
Top view of motor
Bottom view of motor
Spring
Upper
retention ring
Cross section view of Upper retention
ring and spring positions
Important: during shipping/transport the
Upper, Lower retention rings and springs
can detach. Before fitting the Motor and
bucket assembly the Upper and Lower
retention rings have to be seated on
their corresponding ledges on the motor
bucket and the six springs attached as
shown. If this is not carried out the Motor
and bucket assembly will not fit correctly
into the main body.
To Next Page
Loading...
