40
Unscrew the battery compartment on the remote control.
Loosen the base and pull to remove the battery.
This appliance is hot when in use and for a short period after use.
Do not let bare skin touch hot surfaces. If children are present,
consider positioning the appliance out of their reach.
Unplug from the mains electricity supply. If the appliance has
been in use, leave for 1 to 2 hours before cleaning to allow the
appliance to
cool completely. Dust may accumulate on the
surface of the machine. Wipe dust from the loop, filter unit and
other parts with a dry or damp cloth when dust accumulates.
Do not use detergents or polishes.
Clearing blockages
Caution: hot when in use Battery replacement
Cleaning
Battery type CR 2032.
Ensure the appliance is unplugged. If the appliance has been in use,
leave for 1 to 2 hours in order to allow the appliance to cool down
completely. Look for blockages in the air inlet holes and in the small
aperture inside the air loop amplifier. Use a soft brush to remove debris.
To Next Page
Loading...
