Dyson pure hot+cool User Manual

14
Heating
Press the button to set the
required room temperature.
Your machine will pause
when the temperature set has
been reached.
For purification without cool
airflow from the front, select the
airflow direction to the back.
Press the Cooling mode
button to switch your machine
from Heating mode to
Cooling mode.
Auto mode
Set your Dyson purifying fan
heater to Auto mode and the
on-board sensors will intelligently
adjust the settings of the machine
according to the air quality.
Air quality: Your machine will
pause when the target air quality
has been reached, switching
on again when the air quality
levels drop.
Airflow speed: The airflow speed
will increase until the target air
quality and temperature have
been reached.
Night mode: Your machine
will only run with airflow
speeds from 1 to 4.

Dyson pure hot+cool Specifications

General

Filter Type	HEPA and Activated Carbon
Oscillation	350 degrees
Airflow Settings	10 Speed Settings
Remote Control	Yes
Wi-Fi Connectivity	Yes
App Control	Yes
Night Mode	Yes
Timer	Yes
Type	Air Purifier, Heater, Fan
Technology	Air Multiplier
Air Projection	Long-range
Compatibility	Amazon Alexa