18
Additional information
CONTROL WITHOUT REMOTE
• The machine can be controlled through your Dyson Link app.
DYSON LINK APP CONNECTIVITY
• You must have a live internet connection in order for the Dyson Link app to work.
• The machine can connect to either 2.4GHz or 5GHz networks which includes most
modern routers. Check your router documentation for compatibility.
• The Dyson Link app requires an iOS device with at least iOS version 10* or an Android
device with at least Android version 5.
• Your mobile device must have Bluetooth
®
wireless technology 4.0 support (Bluetooth
®
wireless technology Low Energy) in order to set up a connection with the appliance.
Check your device specification for compatibility.
The Bluetooth
®
word mark and logos are registered trade marks owned by the Bluetooth
SIG, Inc. and any use of such marks by Dyson is under license.
Supported Wi-Fi protocols:
– IEEE802.11a
– IEEE802.11b (Not recommended)
– IEEE802.11g
– IEEE802.11n
REPLACEABLE PARTS
BATTERY REPLACEMENT
CAUTION
• Unscrew the battery compartment on the remote control. Loosen the base and pull to
remove the battery.
• Do not install backwards or short-circuit the batteries.
• Do not attempt to dismantle or charge the batteries. Keep away from fire.
• Follow the battery manufacturers' instructions when installing new batteries (battery type
CR 2032).
• Always replace the screw in the remote control and refer to the battery hazard in the
warning section.
NON-WASHABLE FILTER UNITS
• Your filter units are non-washable and non-recyclable.
• To replace your filter units follow the steps as shown.
• Failure to replace the filter units when prompted may result in changes to product
performance and appearance.
• New filter units can be purchased at www.dyson.com/support
AUTO MODE
• A period of 6 days is required after the machine is first used for the sensor to calibrate.
During this period the machine may be more sensitive to VOCs (such as odours)
than normal.
• During first use, whilst the sensors calibrate, the machine can take up to 60 minutes to
show VOC and NO2 data.
AUTOMATIC CUT-OUT
• For your safety this machine is fitted with automatic cut-out switches that operate if the
machine tips over or overheats. If the switches operate, unplug the machine and allow
it to cool. Before restarting the machine check and clear any blockages and ensure that
the machine is on a solid level surface.
• In heating mode the machine will automatically switch ‘off’ after 9 hours of continuous
use. To restart the machine, press the Standby on/off button on either the remote control
or the base, or restart via the Dyson Link app.
DISPOSAL INFORMATION
• Dyson products are made from high-grade recyclable materials. Recycle where possible.
• Dispose of or recycle the battery in accordance with local ordinances or regulations.
• Keep the used batteries away from children as these can still harm children if swallowed.
• Your filter units are non-washable and non-recyclable.
• Dispose of the exhausted filter units in accordance with local ordinances or regulations.
• The battery should be removed from the product before it is discarded. When removing
the battery, the machine must be powered off. The battery should be safely disposed of.
DYSON CUSTOMER CARE
THANK YOU FOR CHOOSING TO BUY A DYSON MACHINE
After registering your 2year guarantee, your Dyson machine will be covered for parts
(excluding filters) and labour for 2years from the date of purchase, subject to the terms
of the guarantee. However, indispensable legal rights of the final consumer under
applicable national legislation governing the sale of consumer goods are not affected
by the terms of the guarantee. If you have any queries regarding your Dyson machine,
visit www.dyson.com/support for online help, general tips and useful information
about Dyson.
Alternatively, you can call the Dyson Helpline with your serial number and details of
where and when you bought the machine.
Your serial number can be found on your rating plate which is on the base of
your machine.