17
To always get the best performance
from your Dyson purifying fan
heater, it's important to regularly
clean it and check for blockages.
Cleaning
If dust accumulates on the surface
of your machine, wipe dust from
the loop amplifier, filter unit
and other parts with a dry or
damp cloth.
Look for blockages in the air inlet
holes on the filter and the small
aperture inside the loop amplifier.
Use a soft brush to remove dust
and debris.
Don’t use detergents or polishes
to clean your machine.
Changing your filters
The Dyson Link app and LCD
screen on your machine will
indicate when to change
your filters.
Order new filters on the Dyson Link
app or www.dyson.com. Your new
filters will come with instructions,
go online for further support
and videos.
Don’t use your Dyson purifying
fan heater without the filters in
place. Unplug your machine from
the mains electricity supply before
cleaning or changing filters.
Error codes
If your machine shows an error
code, try turning it off and then
on again. If this doesn’t clear
the error code contact Dyson
Customer Care.
For further information and
support about the care and
maintenance of your machine and
replacing the filters go to the Dyson
Link app or online:
TW: www.dyson.tw/support
HK: www.dyson.hk/support
MY: www.dyson.my/support
SG: www.dyson.com.sg/support
Looking after your machine
To Next Page
Loading...
Need help?
General
