8
x2
clik
Use both hands to lift the appliance
out of the box, tak ing care to hold
by the base of the appliance only.
Do not lift out by the amplifier loop.
Take the carbon filters out
of the box and remove the
protective packaging.
Attach both carbon filters to
the appliance.
Remove the glass HEPA filters from
their protective packaging and
push into the shrouds until secure.
Position the shrouds onto the base
and push gently until they click
securely into place.
Place the remote control on the top
of the appliance with the buttons
facing down.
Plug in and switch on.
Assembly
To Next Page
Loading...
Need help?
General
