Getting started
Eco
Boost
Auto
Power modes
Eco mode
Auto and Med mode
Boost mode
Measures microscopic dust particles
Your machine has three power modes for
different tasks. Change power modes quickly
using a single button.
Maximum run time for longer cleans all
around your home.
The optimum balance of power and run time.
Attach your cleaner head or Hair screw tool to
activate Auto mode. Suction power automatically
adapts to dust levels.
Designed for intensive spot cleaning
of ground–in dirt
A piezo sensor continuously sizes
and counts dust particles at the inlet.
Attach your cleaner head or Hair
screw tool and use in Auto mode to
automatically increase suction power
when needed.
1
1. Quantity and size of dust displayed on screen varies depending on usage. Automatic suction adaptation only occurs in auto mode.
Med
Turn your laser on and off
Turn your laser on or off with the slider
switch on your cleaner head.
Class 1 laser product – safe
for pets and humans. Avoid
looking directly into the beam.
9,927,641
1.1M
450K
1.6K
10m 60 180 500
Diagram showing the connection of
the wand onto the main body, with
the wand release button aligned
with the top of the main body.
The screen showing the machine set to
Eco mode with a full battery in green
to show that this will give the longest
battery life of the three modes.
The screen showing the machine set
to Boost mode with a red battery to
show that this will give the shortest
battery life of the three modes.
Location of the Selection button
on the screen on the filter end
of the machine.
The screen, on the end of the
main body, showing a graph of
the sizing and counting of the
dust particles.
Arrow showing the end
of the wand connecting
to the cleaner head.
Two screens showing the machine
set to Auto mode and Med mode
with a blue battery showing that this
will give a medium length of battery
life.
To Next Page
Loading...
