Need help?Do you have a question about the Dyson V12 Detect Slim and is the answer not in the manual?
General| Turbo | Yes |
|---|---|
| Cleaning type | Dry |
| Cleaning surfaces | Carpet, Hard floor |
| Number of settings | 3 |
| Vacuum air filtering | - |
| Dirt separating method | Cyclonic |
| Color name | Sprayed Gloss Gold /Gloss Gold |
| Display type | LED |
| Product color | Gold |
| Dust container type | Bagless |
| Power source | Battery |
| Charging time | 4 h |
| Suction power | 150 AW |
| Battery voltage | - V |
| Package depth | 154 mm |
| Package width | 806 mm |
| Package height | 271 mm |
| Package weight | 5580 g |
| Vacuum brushes included | Motorized brush |
Weight and Dimensions| Depth | 252 mm |
|---|---|
| Width | 250 mm |
| Height | Blablabla mm |
| Weight | 2400 g |
Explains the three power modes: Eco, Auto/Med, and Boost, for different cleaning tasks and battery life.
Details how to navigate and control machine settings using the button, including particle count and language.
Explains the particle sensor, graph display, and how to adjust reactive suction power sensitivity.
Instructions on how to change the display language on the LCD screen using the selection button.
Describes the visual indicators for battery status, including low run time and empty battery alerts.
Guidance on optimizing battery performance and life by using specific power modes.
Step-by-step guide on how to detach the click-in battery from the vacuum cleaner handle.
Instructions for correctly aligning and attaching the click-in battery back to the vacuum cleaner handle.
Procedure to gently tap the filter over a bin to remove loose dust and debris before washing.
Detailed steps on how to wash the filter using warm running water and rubbing to remove dirt.
Instructions for removing excess water from the filter by shaking it firmly in an upward and downward motion.
Guide to safely detach the brush bar from the cleaner head by releasing the end cap.
Instructions for washing the brush bar under running water and standing it upright to dry completely.
Steps for reattaching the brush bar and end cap to the cleaner head after drying.
Procedure to remove the cover and brush bar from the Hair screw tool for cleaning.
Guidance on checking and removing hair, fibres, or other obstructions from the Hair screw tool's brush bar.
Instructions for correctly putting the Hair screw tool back together after clearing obstructions.
Advice on maximizing battery performance and lifespan by using recommended power modes.
To Next Page
