HANDLEBAR
I. Adjust gear
When in Pedal Assist Mode, press to gear up by one level, or press to gear down
by one level.
II. Switch speed unit
Press and hold + together to switch the unit of speed for display.
III. Activate/Deactivate cruising at 4.5 km/h
When your eBike is still, press and hold to activate cruising at 4.5 km/h. Release the button
to stop cruising.
Press and hold for ten seconds to switch on/off the headlight.
When on the P16 menu, pressing and holding for ten seconds shall erase ODO.
IV. Turn on/off the display
When the display is on, press and hold to turn off the display. When the display is off, press
and hold to turn on the display.
V. Switch the display of various data: Press to view various data.
VI. Set the parameters: Press and hold and together to initiate parameter setting or
viewing. Parameters that can be set or viewed include: Display brightness, unit of mileage, and
ODO erasure (please see P01-P03). Press or to adjust the value by the minimum
unit. Press and hold or to adjust the value swiftly. Upon desired value, press to save,
and enter the next item. Press and hold and together to exit parameter setting or
viewing. The setting times out after five seconds of inactivity.
Brake Lever
Power Button Display Shifter Grip Cover
Bell Mechanic Shifter Brake Lever
To Next Page
Loading...
