E-Bench KH 2295 - Using Timer Functions

2
To switch the alarm functions for week-
ends back on again: Press the button “Group
WEC”
f
once more. In the display
d
the
indicator “WEC” extinguishes.
8.3 Using the timer functions of the
RDS Radio Alarm
8.3.1 Programming the sleep timer
With the sleep timer switched on, the radio
automatically switches itself o aer a pro-
grammed period of time. is facility can be
used if you like to listen to music to help you
fall asleep.
To programme the sleep timer:
1
Press the button “Sleep”
y
once. If you
press the button “Sleep”
y
with the radio
switched o, it switches itself on. Blinking
in the display
d
are the bed indicator, “”
and the clock symbol.
2
Programme in the desired period until
switch o of the radio. Timespans between
 and  minutes are available. To do this,
press the buttons
o
resp.
a
. With
each press of the buttons you increase or de-
crease the indicated timespan by ten min-
utes. If you select “00” as the timespan, the
radio switches itself o aer a few seconds
without pressing a button.
3
Press the button “Sleep”
y
once more to
conrm the programming. e radio now
switches itself o automatically on expiry
of the programmed timespan. e time re-
maining before automatic switch o is
shown in the display
d
.
4
To switch o the sleep timer: Hold the but-
ton “Sleep”
y
pressed down until the radio
switches o. e bed symbol and the time-
span indicator extinguish.
8.3.2 Programming the appointment timer
(“Special Day Alert”)
With the appointment timer you can remind
yourself of important dates/times. e RDS Ra-
dio Alarm oers ve memory slots (“SDA” to
“SDA”) for appointments. To programme the
appointment timer:
ô
Note:
To carry out the steps 1 to 8 you have ca. ten sec-
onds for each step. If one step is delayed, you
must start again from step 1.
1
With the radio switched o, press the button
“Memory”
g
four times. In the display
d
there now blinks in rotation the date indica-
tor “--” and “SDA”.
2
Press the button
i
once. In the display
d
the date indicator “31” now blinks.
3
By pressing the buttons
o
resp.
a
,
programme the desired day. e weekday
details are thereby automatically modied to
the programmed day.
4
Press the button
i
once more. In the
display
d
the month indicator “12” now
blinks.
5
By pressing the buttons
o
resp.
a
programme the desired month. e week-
day details are thereby automatically modi-
ed to the programmed month.
6
Press the button
i
once more. In the
display
d
the year indicator “06” now
blinks.
7
By pressing the buttons
o
resp.
a
programme the desired year.
8
Press the button “Memory”
g
once to con-
rm the programming.
 |
 