EasyManua.ls Logo

E-Bike Forme - Electronic System Maintenance; Care and Cleaning; Battery and Charging; Battery Handling and Charging

Default Icon
29 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Th
e checklist that follows shows critical areas for you to check.
If a part of your bicycle does not
function correctly, use the instructions in this manual to repair your bicycle, or take your bicycle
to your dealer for service. Do not ride a bicycle with a part that is damaged; replace the part.
CARE AND MAINTENANCE OF THE ELECTRONIC SYSTEM
The motor, which is the heart of your e-bike system, is maintenance-free.
That means that you do not have to do any maintenance work.
In general, the other components of your system are also maintenance-free, apart from the fact
that the battery must be charged up regularly.
However, you must keep your system clean and free of dirt and detritus.
If your Forme e-bike should ever require any maintenance, then have it done only by a
professional e-bike dealer.
Always remove the battery before carrying out any care work on the system.
Never clean the battery with anything that is wet.
Take special care that the contacts do not get wet.
It is best to clean the battery and the remaining system parts with a slightly damp cloth.
Do not get any water on the contacts and plugs.
Never clean an e-bike using a high-pressure cleaner or a jet of water from a hose. Use a slightly
damp cloth or sponge to clean the system, but never use anything that is actually wet.
Never press the buttons while cleaning the control element or doing care work on it.
Opening the motor or any parts of the motor makes the warranty null and void at once and
means that you cannot make any claims under warranty.
Never remove the type label from the motor or battery. These are used to identify the motor and
to display the statement of legal conformity in compliance
Deliberately removing either label leads to the warranty becoming null and void
BATTERY AND CHARGING
Do no
t leave your battery on charge for long periods of time or leave it unattended whilst
charging
Remove the battery pack from the eBike before beginning ANY work (e.g. inspection,
repair, assembly, maintenance, work on the chain, etc.) on the eBike, transporting it by car or
plane, or storing it.
Unintentional activation of the eBike system poses a risk of injury.
Do not open the battery pack. Danger of short-circuiting. Opening the battery pack voids
any and all warranty claims.
Protect the battery against heat (e.g. prolonged sun exposure) and fire and from being
submerged in water. Do not store or operate the battery near hot or flammable objects. There is
a risk of explosion.
Keep the battery pack away from paper clips, coins, keys, nails, screws or other small
metal objects, that can make a connection from one terminal to another. Shorting the battery-
pack terminals together may cause burns or a fire. For short-circuiting damage caused in this
manner, any and all warranty claims shall be invalid.
F O R M E B I K E S . C O . U K
14

Related product manuals