E-Bike Forme - Safety Notes for On-board Computer; Product Description and Intended Use; Assembly and Installation

Safety Notes
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions
may result in electric shock, fire and/or serious
injury.
Save all safety warnings and instructions for
future reference.
The term “battery pack” used in these
operating instructions, irrespective of model,
refers both to standard battery packs (battery
packs with holder on the bike fra
me) and to
rack-
type battery packs (battery packs with
holder in the rear rack/ carrier).

Do not use the on-board computer as a
handle.
Lifting the eBike up by the on-board
computer can cause irreparable damage to the
on-board computer.

Make sure to not be distracted by the display
of the on-board computer.
If you do not focus
exclusively on the traffic, you risk being
involved in an accident. If you want to make
entries in your on-board computer other than
switching the assistance level, stop and enter
the appropriate data.

Read and observe the safety warnings and
instructions in all operating instructions of the
eBike system and in the operating instructions
of your eBike.
Product Description and Specifications
Intended Use
The Intuvia on-board computer is designed to
control Bosch eBike systems and display riding
data.
Product Features
The numbering of the components shown
refers to the illustrations on the graphic pages
at the beginning of the manual.
Individual illustrations in these operating
instructions may differ slightly from the actual
circumstances depending on the equipment of
your eBike.
1
Display-function button
“i”
2 Bike lights button
3
On-board computer
4
Holder for on-board computer
5
On/Off button for on-board computer
6 “RESET”
button
7
USB port
8
Protective cap of USB port
9
Operating unit
10
Display-function button
“i”
on the operating
unit
11 Decrease assistance level/scroll down
button
“–”
12 Increase assistance level/scroll up button
“+”
13
Push-assistance button
“WALK”
14
Lock latch for on-board computer
15
Locking screw for on-board computer
USB charging cable (Micro A – Micro B)*
* not illustrated; available as accessory
Display elements of on-board computer
a
Drive unit assistance indicator
b
Assistance-level indicator
c
Light indicator
d
Text indication
e
Value indication
f
Speed indication
g
Shift recommendation: higher gear
h
Shift recommendation: lower gear
i
Battery charge-control indicator
Assembly
Inserting and removing the battery pack
For inserting and removing the eBike battery
pack in/fr
om the eBike, please read and
observe the battery pack operating
instructions.
Inserting and removing the on-board computer
To
insert
the on-board computer
3
, slide it from
the front into the holder
4
.
To
remove
the on-board computer
3
, press the
lock latch
14
and slide the on-board computer
F O R M E B I K E S . C O . U K
18