E-Bike Forme - Error Code Indication; External Device Charging; Maintenance and Cleaning

scroll down, or the lighting button 2 next to
– “Displ. vx.x.x.x”: This is the software version
of the display.
–
“DU vx.x.x.x”:
This is the software version of
the drive unit. This menu item is displayed only
when the on-board computer is in the holder.
–
“DU # xxxxxxxxx”:
This is the serial number of
the drive unit. This menu item is displayed only
when the on-board computer is in the holder.
–
“ Service MM/YYYY”: This menu item is
displayed when the bike manufacturer has set
a fixed service appointment.
–
“ Serv. xx km/mi”:This menu item is
displayed when the bike manufacturer has set
a fixed service appointment after a certain
mileage has been reached.
–
“Bat. vx.x.x.x”:
This is the software version of
the battery pack. This menu item is displayed
only when the on-
board computer is in the
holder.
Error Code Indication
The components of the eBike system are
continuously and automatically monitored.
When an error is detected, the respective error
code is indicated in text indication
d
.
Press any button on the on-board computer
3
or on the operating unit
9
to return to the
standard indication.
Depending on the type of error, the drive unit is
automatically shut off, if required. Continued
travel without assistance from the drive unit is
possible at any time. However, have the eBike
checked before attempting new trips.

Have all repairs performed only by an
authorised bike dealer.
Power Supply of External Devices via
USB Connection
With the USB connection, it is possible to
operate and charge most devices whose power
supply is possible via USB (e.g., various mobile
phones).
Prerequisite for charging is that the
on-board computer and a sufficiently charged
battery pack are inserted in the eBike.
the on-board computer. Connect the USB
connection of the external device to the USB
port
7
on the on-board computer using the USB
charging cable Micro A –
Micro B (available
from your Bosch eBike dealer).
Once the consumer has been disconnected,
the USB connection must be sealed again
carefully with the protective cap
8
.

A USB connection is not a waterproof plug-in
connection.
When riding in the rain, an external device must
not be connected and the USB connection
must be completely sealed with the protective
cap 8.
Maintenance and Service
Maintenance and Cleaning
Do not immerse any components, including the
drive unit, in water or clean them with
pressurised water.
Clean your on-
board computer using a soft
cloth dampened only with water. Do not use
any detergents.
Have your eBike system checked by an expert
at least once a year (including mechanical
parts, up-to-dateness of system software).
The bicycle manufacturer or dealer may also
base the service date on the distance travelled
and/or a period of time. In this case, the on-
board computer will show you every time it is
switched on that the service date is due in the
text indication
d
by displaying
“ Service”
for 4 s.
For service or repairs on the eBike, please refer
to an authorised bicycle dealer.
After-sales Service and Application Service
In case of questions concerning the eBike
system and its components, please refer to an
authorised Bosch eBike dealer.
For contact data of authorised Bosch eBike
dealers, please refer to
www.bosch-ebike.com
F O R M E B I K E S . C O . U K
23