Need help?Do you have a question about the E-FLITE Pulse XT 25e ARF and is the answer not in the manual?
General| Approximate Assembly Time | 5-7 hours |
|---|---|
| Experience Level | Intermediate |
| Recommended Environment | Outdoor |
| Assembly Required | Yes |
| Material | Balsa and plywood |
| Covering | UltraCote |
| Power System | E-flite Power 25 Brushless Outrunner Motor, 1250 Kv |
| Battery | 14.8V 3200mAh 4S LiPo |
| Radio | 4+ channel |
| Servos | 4 servos required |
| Speed Control | 60A Brushless ESC |
| CG (center of gravity) | 3.5 in (89mm) back from the leading edge of the wing |
| Prop Size | 12x8 |
Key specifications for the model, including wingspan, length, area, and weight.
Details on the required radio system and airborne components.
Information about the E-flite Power 25 and Power 32 motors compatible with the model.
Lists all required tools, adhesives, and supplies for assembly.
Lists motor, ESC, battery, propeller, and spacers for the Power 32 setup.
Verifying that control surfaces move in the correct direction relative to stick inputs.
Guidance on setting control surface throws for optimal flight performance.
Instructions for charging batteries safely and correctly.
Steps for performing a radio range check before flying.
A checklist of essential final checks before taking the model to the air.
Detailed safety guidelines, warnings, and precautions for LiPo batteries.
Instructions on how to handle and dispose of batteries that have sustained crash damage.
Procedures for handling batteries showing signs of swelling or overheating.
Basic instructions for the safe disposal of LiPo batteries.
General safety precautions and warnings for operating the hobby product.
To Next Page