Need help?Do you have a question about the E-Z UP Endeavor and is the answer not in the manual?
Step 1: Unpacking and partially opening the shelter frame for top installation.
Step 2: Attaching the fabric top to the frame using hook and loop strips.
Step 3: Securing the fabric top to the frame using attachment points.
Step 1: Opening the E-Z UP® shelter frame to initiate setup.
Step 2: Engaging auto-slider pins to secure the fabric top to the frame legs.
Step 3: Extending and securing the shelter's frame legs to the desired height.
Step 1: Collapsing the shelter legs by retracting the inner sections.
Step 2: Releasing the auto-slider pins that secure the fabric top.
Step 3: Final steps to close the frame and store the shelter.
To Next Page
General
