4810 Clover Road • Greensboro, NC 27450 • 1-800-336-2776 • www.eagleequip.com • © Eagle Equipment 2018.01 • page 17
5. MAINTENANCE CONT.
In order to achieve the reliability of jaws and Bead Breaker shovel, operate as follows to keep their
valves clean:
1. Remove the left side cover of the machine body by unscrewing the two screws;
2. Loosen the valve mufers (A) which belong to Jaws open and close Pedal and Bead Breaker Pedal;
3. Clean the mufers with compressed air; please replace it referring to the spare parts list if it is
damaged (Figure 27).
Figure 25 Figure 26 Figure 27
To Next Page
Loading...