- 2 -
Contents
page
1. Machine Specifications 3
2. Machine Safety Information 4
2.1 Operational Safety 4
2.2 Environmental Considerations 4
2.3 Machine Transportation 4
2.4 Operator Position 4
3. Machine Operation 5
3.1 Control Panel Functions 5
3.2 Feeding Strap 6
3.3 Machine Operation 7
4. Maintenance & Troubleshooting 8
4.1 Routine Maintenance 8
4.2 Lubrication 8
4.3 Decelerator 8
4.4 Proximity Switch 8
4.5 Strap Feed 9
4.6 Position Adjustments 9
4.7 Troubleshooting 10
5. Main Parts, Illustrations & Parts List 12
5.1 Commonly Replaced Parts 12
6. Main Parts, Parts Illustrations & Parts List 13
6.1 Carriage Drive Assembly 13
6.2 Slide Assembly 16
6.3 Top Body Assembly 17
6.4 Left Top Knife Assembly 18
6.5 Middle Top Knife Assembly 19
6.6 Right Top Knife Assembly 20
6.7 Spindle Assembly 21
6.8 Heating Body Assembly 22
6.9 Heating Section & Slide Plate 23
6.10 Heating Section Assembly 24
6.11 Strapping Force Assembly 25
6.12 Strapping Pendulum Bar 26
6.13 Pre-Strap Feeding Mechanism 27
6.14 Pendulum Mechanism 28
To Next Page
Loading...
