Eagle 2000F Series - Basic Machine Operation

- 14 -
3.2 Basic Machine Operation
1. Screen Controller
2. Table Speed
3. Carriage Speed
4. Power Indicator
5. Start Button
6. Load Force
7. Reset Button
8 Emergency Stop Button
9. Power Switch
The turntable speed and load force knobs can be adjusted to achieve desired film tension.
The speed and load force work in conjunction. If the table speed is increased, the load force will
need to be decreased to maintain the same film tension. If the table speed is decreased, the
load force will need to be increased to maintain the same film tension.
The Eagle 2000F can be operated remotely by use of a hand-held controller.
This allows the machine operator to run and stop the stretch wrapper wirelessly.