Eagle 2000F Series - Specifications

- 5 -
1.2 Specifications - Eagle 2000F
Power Supply
110VAC, 60Hz
Air Supply
80 PSI
Turntable Speed
(Standard 0-12 rpm) (Optional 0-20rpm) *
Turntable Motor
1 HP 750W 1420 RPM 220V 1:30 Gearbox
Turntable Diameter
64.9”
Turntable Diagonal
58”
Turntable Height
3.4”
Turntable Gear
1:5
Turntable Chain
12A-1 ISO
Carriage Up/Down
1/3 HP 1390 RPM 220V 1:60 Gearbox
Carriage Up/Down Chain
08B-1 ISO
Pre-Stretch Motor
1/3 HP 1390 RPM 220V 1:20 Gearbox
Pre-Stretch Gear Ratio
1:12
Pre-Stretch Chain
06B-1 ISO
Film Stretch
250% pre-stretch with adjustable load force
Film Lift
Photo-eye controlled to match pkg height **
Film Width
20” (standard) or 30” (option)
Adjustable Internal Limit Switches
8” Top & Bottom Rails
Max Film Height
87”
Mast Height
94”
Max Turntable Weight Capacity
5000 lbs
Max Package Height (2” Overlap)
87”
Machine Dimensions
96.5” X 59” X 99”
Shipping Weight
1295 lbs
Attachment
Ramp or Custom Heavy Duty ***
Noise
≤75 DB
Environment
Humidity ≤98% Temperature 32-104°F
1
Note: Black product requires custom photo-eye installation.
2
Factory ramp is for use with hand pallet jacks only. Maximum combined weight of jack and product must not
exceed 1,300lbs. Custom heavy-duty ramps are available for use with loads exceeding 1,300lbs.
3
Turntable maximum RPM can be increased to 20 RPM upon request.