Moving Loads
Maximum capacity towing or pushing of loads shall be done with the transmission
selector lever in 1(first) or REV (reverse) gears.
6-1
Instructions for Safe Towing/Pushing Load
Load Towing Safety
If towing a load, check to see that:
• The towed load is securely connected to the hitch of the tractor. Be sure hitch is
locked/fastened into the closed position.
• The towed cargo load is secure and within the exterior frame of the vehicle that is
carrying the load.
• For maximum tractor and load control and stability, as well as towing power, be
sure the tongue of the trailer is parallel to the ground when connected to the
tractor's hitch.
• Watch the trailer's rear swing clears any obstructions when cornering.
Load Pushing Safety
If pushing a load:
• Be sure the tractor is designed for and intended to be used to push the load.
• If using the tractor for "pushback" of an aircraft, be sure the tow bar is securely
fastened to both the aircraft and the tractor and the tractor hitch is in the locked
position.
Caution: Pushing or towing loads in D (Drive) can cause
transmission failure
To Next Page
Loading...
