What to do if my EarthQuake Tiller is hard to start?
If your EarthQuake Tiller is hard to start: * Drain the old fuel and replace it with fresh fuel, adding a gas stabilizer at the end of the season. * Ensure the spark plug wire is securely attached to the spark plug. * Make sure the drive safety control levers are released to the neutral position before starting the engine.
What to do if EarthQuake 6015V is difficult to control when tilling?
If your EarthQuake Tiller is difficult to control when tilling, and the machine jumps or lurches forward: * Lock the wheels in the tilling position. * Raise the tines for shallower tilling by lowering the depth regulator lever.
How to fix EarthQuake 6015V engine that is hard to start?
If your EarthQuake Tiller engine is hard to start: * Drain the old fuel and replace it with fresh fuel. Consider using a gas stabilizer at the end of the season. * Make sure the spark plug wire is securely attached to the spark plug. * Ensure that the drive safety control levers are released to the neutral position to start the engine.
What to do if EarthQuake 6015V engine misses or lacks power?
If your EarthQuake Tiller engine misses or lacks power: * Raise the tines for shallow tilling by lowering the depth regulator lever. * Remove and clean the fuel tank. * Clean or replace the air cleaner. * Replace the spark plug and adjust the gap. * Drain and refill the gas tank and carburetor. If the issue persists and you suspect improper carburetor adjustment, take the tiller to an authorized engine service center.
What to do if EarthQuake 6015V engine won't stop?
If your EarthQuake Tiller engine will not stop when the throttle control is positioned at stop, consult the engine manual to check and adjust the throttle linkage.
Why doesn't my EarthQuake 6015V Tiller move when tines and wheels are turning?
If the tines and wheels turn, but the EarthQuake Tiller does not move, lower the tines for deeper tilling by raising the depth regulator lever.
What to do if tines turn but wheels don't on EarthQuake 6015V?
If the tines turn but the wheels do not turn on your EarthQuake Tiller: * Ensure the wheels are locked in the tilling position. * If the problem persists, there may be an internal transmission failure; consult your dealer.
How to control EarthQuake 6015V Tiller that jumps forward?
If your EarthQuake Tiller is difficult to control when tilling (jumps or lurches forward): * Lock the wheels in the tilling position. * Raise the tines for shallower tilling by lowering the depth regulator lever.
What to do if EarthQuake 6015V engine runs rough?
If your EarthQuake Tiller runs rough or floods during operation, try cleaning or replacing the air cleaner.
General| Brand | EarthQuake |
|---|---|
| Model | 6015V |
| Category | Tiller |
| Language | English |
To Next Page
