EasyManua.ls Logo

EAS Electric EMD12I - Installation Instructions; Installation Preparation

EAS Electric EMD12I
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
64
8. INSTALLATION INSTRUCTION
Attention!
The installation of the pipes and electrical equipment’s should be done by
professionals.
8.1 Installation preparation
The installation position of dishwasher should be near the existing inlet and drain hoses
and power cord.
One side of the cabinet sink should be chosen to facility the connection of drain hoses
of the dishwasher.
Note: please, check the accompanying installation accessories.
Please carefully read the installation instruction.
Illustration of cabinet dimensions and installation position of the dishwasher.
Preparations should be made before moving the dishwasher to the installation place.
1. Choose a place near the sink to facilitate the installation of inlet and drain hoses
(see figure 1).
2. If dishwasher is installed at the corner of the cabinet, there should be some
space (illustrated in figure 2) when the door is opened.
WARNING
Electrical shock hazard disconnects electrical power before installing
dishwasher.
Failure to do so can result in death or electrical shock.
V.1

Table of Contents

Related product manuals