EAS Electric EMD12I - Cleaning Performance Issues; Drying Performance Issues; Error Codes

72
9.1 Error codes
When some malfunctions come on, the appliance will display error codes to
warn you:
Codes
Meanings
Possible Causes
The Rapid light flicker fleetly
Longer inlet time.
Faucets is not opened, or water intake is
restricted,or water pressure is too low.
The Rapid light and 90mins
Not reaching required temperature
Mulfunction of heating element.
l i g h t f l i c k e r f l e e t l y
The ECO light flicker fleetly
Overflow.
Some element of dishwasher leaks .
Problem
Possible Causes
What To Do
The dishes
The dishes were not
See notes in " Loading the Dishwasher Baskets ".
are not clean
loaded correctly.
The programme was
Select a more intensive programme.
not powerful enough.
See" Wash Cycle Table ".
Not enough detergent
Use more detergent, or change your detergent.
was dispensed.
Items are blocking
Rearrange the items so that the spray can rotate freely.
the path of spray arms.
The filter combination
Clean and/or fit the filter combination correctly.
Unsatis
in the base of wash
Clean the spray arm jets. See "Cleaning the Spray
cabinet is not clean or
Arms".
-factory
is not correctly fitted.
washing
This may cause
result
the spray arm jets
to get blocked.
Cloudiness
Combination of soft
Use less detergent if you have soft water and select
on glassware
water and too much
a shortest cycle to wash the glassware and to get
detergent.
them clean.
Black or gray
Aluminum utensils
Use a mild abrasive cleaner to eliminate those marks.
marks on dishes
have rubbed against
dishes.
Detergent left in
Dishes block
Re-loading the dishes properly.
dispenser cups
detergent cups.
The dishes
Improper loading
Load the dishwasher as suggested in the directions.
are not drying
Too little rinse-aid
Increase the amount of rinse-aid/refill the rinse-aid
dispenser.
Dishes are removed
Do not empty your dishwasher immediately after
Unsatis
too soon
washing. Open the door slightly so that the steam can
-factory
escape. Begin unloading the dishwasher only once t
drying
he dishes are barely warm to the touch. Empty the low
basket first. This prevents water form dropping off
result
dishes in the upper basket.
Wrong program
In short program the washing temperature is lower.
has been selected
This also lowers cleaning performance. Choose
a program with a long washing time.
Use of cutlery with
Water drainage is more difficult with these items.
a low-quality coating
Cutlery or dishes of this type are not suitable for
washing in the dishwasher.
V.1