Need help?Do you have a question about the Easee Home Wallbox and is the answer not in the manual?
General| Connection | Type 2 socket |
|---|---|
| Dimensions | 256 x 193 x 106 mm |
| Weight | 1.5 kg |
| Operating Temperature | -30°C to +50°C |
| Protection Rating | IP54 |
| Impact Resistance | IK08 |
| Mounting | Wall-mounted |
| Charging Power | 22 kW |
| Connectivity | Wi-Fi, Bluetooth, 4G |
| Input Voltage | 230V / 400V |
| Input Current | 32A |
| Compatibility | All electric vehicles |
Detailed steps for opening the charging robot using the included tool.
Mount the backplate using wall screws and appropriate plugs. Recommended height 130-140 cm.
Fit sealing plugs, secure cable sheath with strain relief, and seal unused holes.
Strip cable cores, connect using termination ports, and tighten screws to 5Nm. Inspect terminations.
Match tabs to slots and push down firmly until a click is heard.
Connect to the charger's Wi-Fi, access 192.168.4.1 via browser, and log in.
Enter installation details and follow on-screen instructions. Press 'i' for more info.
Lock the Chargeberry with the included padlock for extra security.
Hang cover, press bottom until click, bend rubber, and screw in locking screw.
To Next Page