-3-
Switchover summertime/wintertime
OK OK
Menu
OK
Menu
OK OK OK OK
OK
9 10
Prog
Prog
1
Select SU-WI and press “Ok” key.
Select the required summer/winter
mode with “ ” keys and press“Ok” key.
6
Set the start month of summer time and press “Ok” key.
7
Set the start day of summer time and press “Ok” key.
8
Set the start month of winter time and press “Ok” key.
9
Set the start day of winter time and press “Ok” key.
10
11 12 13 Exit from the setting by pressing “Menu” key.
Create a new program
4 5 6
Prog Prog Prog
1
Select PROGRAM and press “Ok” key.
2
Select NEW and press “Ok” key.
3
Display new program number and press “Ok” key.
When the programs memory is full, new program will not be created, symbol “ ” appears on the screen.
4
Select CHANNEL 1 or CHANNEL 2with “ ” and press “Ok” key.
5
Display the output state of channel 1. Choose “ON” or “OFF” with “ ” keys and then press “Ok” key.
6
Display the output state of channel 2. Choose “ON” or “OFF” with “ ” keys and then press “Ok” key.
7
Set the hour with “ ” keys and then press “Ok” key.
8
Set the minute with “ ” keys and then press “Ok” key.
9
Set the program activity on a week day( from Monday to Sunday) with “ ” keys.
Long press 0.5s, increase the numerical value quickly
Long press 0.5s, decrease the numerical value quickly
If is selected, program operation is enabled for flashing day. If is selected, program is not used for flashing day.
10
Exit from the setting by pressing “Menu” key.
To Next Page