What to do if the Eastsign Power Tool temperature is out of control?
If the temperature of your Eastsign Power Tool is out of control, there are two potential causes. First, the solid-state relay might be broken, in which case you should replace it. Second, the temperature control device itself might be faulty and require replacement.
Why is the temperature not stable in my Eastsign Power Tool?
If the temperature in your Eastsign Power Tool is unstable, it could be due to a broken temperature sensor, which requires replacement. Alternatively, the heating tube may be damaged or aging, and replacing it is the suggested solution.
How to fix Eastsign SOT-64 when the temperature cannot be higher or is rising slowly?
If the temperature of your Eastsign Power Tool is not increasing or is rising very slowly, it could be due to several reasons: * The solid-state relay may be damaged and needs replacing. * One or more electric tubes in the heating unit may be damaged, requiring replacement. * One or more electric tubes in the heating unit may be aging, also requiring replacement.
What to do if the main switch trips on my Eastsign SOT-64?
If the main switch trips on your Eastsign Power Tool, it's likely due to a breakdown of the collector ring. The suggested solution is to replace the collector ring or replace the SSR (solid state relay).
What to do if the blanket and heating roller don’t revolve on my Eastsign SOT-64 Power Tool?
If the blanket and heating roller on your Eastsign Power Tool are not revolving, consider these potential causes and solutions: * The blanket might be too loose; adjust the tension of the blanket. * The gear might be skidding; fasten the gear screws. * The bearing might be jammed; check or replace the bearing. * The frequency converter might have failed; check or replace the frequency converter. * The motor or redactor might have failed; check or replace them.
Details on heat/power switches, blanket maintenance, and heating roller safety guidelines.
Explanation of warning signs (Anti-grinding, High Voltage, Chain, High Temp) and their implications.
Covers electrical grounding, workplace safety, handling, and machine cleaning precautions.
Technical details of the machine including model, voltage, power, dimensions, and weight.
Details found on the machine's nameplate, including model, power, and serial number.
Explanation and identification of all visible parts of the rotary heat press machine.
Overview of the internal components within the left and right cabinets.
Steps for safely unpacking the machine and its components.
Instructions for installing the worktable, main structure, and related parts.
Important notices regarding screw tightening, environment, grounding, wiring, and leveling.
Procedure for pre-shrinking the blanket, including temperature, time data, and relay adjustments.
Detailed steps for leveling the machine using a hosepipe and water.
Specifications for the heat transfer oil used in the heating system.
General| Brand | Eastsign |
|---|---|
| Model | SOT-64 |
| Category | Power Tool |
| Language | English |
To Next Page