Eastwood Concours PRO User Manual

Part #14771
HVLP PAINT GUN
INSTRUCTIONS
© Copyright 2014 Easthill Group, Inc. Instruction part #14771Q Rev. 8/14
If you have any questions about the use of this product, please contact
The Eastwood Technical Assistance Service Department: 800.544.5118 >> email: techelp@eastwood.com
PDF version of this manual is available online >> eastwood.com/14771manual
The Eastwood Company 263 Shoemaker Road, Pottstown, PA 19464, USA
US and Canada: 800.345.1178 Outside US: 610.718.8335
Fax: 610.323.6268 eastwood.com
ADDITIONAL ACCESSORIES
• # 14773 1.3mm Needle/Nozzle Set
• # 14774 1.7mm Needle/Nozzle Set
• # 14775 2.0mm Needle/Nozzle Set
• # 10041Z Eastwood PRE Painting Prep, Aerosol
• # 12846Z Aerosol Injected Cleaner
• # 11455-11456 Respirators
• # 20403-20406 Coveralls
• # 11472 Concours PRO Detail Gun
• # 51550B 600cc Aluminum Cup
• # 50207 DeKups
®
Adapter
• # 11549 3M
®
PPS Adapter
• # 14049 Gunner
®
Cup Adapter

Eastwood Concours PRO Specifications

General

Type	HVLP Gravity Feed
Nozzle Size	1.3mm
Fluid Adjustment	Yes
Air Inlet	1/4" NPT
Material	Aluminum
Included Accessories	Wrench, Cleaning Brush

Summary

Gun Settings

Air Cap

Adjust the Air Cap for proper orientation and retaining ring position for optimal spray pattern.

Fluid Control

Control paint flow by adjusting the Fluid Control knob, affecting needle travel and fluid delivery.

Fan Control

Modify the spray pattern size and shape by adjusting the Fan Control knob.

Air Control

Fine-tune airflow and inlet pressure using the Air Control knob for desired spray results.