The TERRIER SERIES SWING GATE OPENER is an automated system designed for opening and closing gates. This user manual provides comprehensive instructions for qualified technicians specializing in installations and automations. It emphasizes the importance of safety precautions, proper installation, and regular maintenance to ensure optimal performance and longevity of the system.

Function Description:

The TERRIER SERIES SWING GATE OPENER is specifically engineered for gate opening and closing applications. It utilizes a 24Vdc motor with a mechanical release mechanism, operating on a worm gear system. The motor is designed to provide reliable and smooth operation for swing gates, enhancing convenience and security for residential or commercial properties. The system includes various components such as a 24V DC flashing light, push button, control box, photo sensor, and a transmitter for remote control. The emergency release feature allows for manual operation of the gate in case of power failure or system malfunction.

Important Technical Specifications:

Feature	TERRIER150	TERRIER200
Motor	24Vdc motor with mechanical release	24Vdc motor with mechanical release
Gear type	Worm gear	Worm gear
Thrust	1500N	2000N
Stroke length	360mm	400mm
Power supply	24Vdc	24Vdc
Maximum operating	4.2A for maximum 10 seconds.	4.2A for maximum 10 seconds.
Maximum gate weight	150 kg per leaf	200 kg per leaf
Maximum gate length	2 meters	2.5 meters
Duty cycle	20%	20%
Operating Temperature	-20°C ~ +50°C	-20°C ~ +50°C
Dimension	694mm * 100mm * 197mm	819mm * 100mm * 197mm
Weight	3.1kg	3.6kg

The installation data sheet provides critical dimensions and guidelines for proper setup. For instance, the "C" value, which represents a specific measurement from the gate, is specified as 88mm. The "D" value can be easily measured from the gate, and "A" is calculated as "C" + "D". The "B" value, related to the leaves opening angle, can be calculated based on "A". It is crucial to ensure that "B" and "A" values are similar to allow for smooth gate operation and reduce strain on the motor.

Usage Features:

The system is designed for ease of use and safety. Automatic controls such as remotes, push buttons, and key selectors should be placed properly and out of reach of children. The user manual emphasizes operating the drive only when there is a full view of the gate. The motor fixing process involves assembling the rear bracket and fixing it to the pillar, then releasing the gate opener and placing the pin into the fitting positions. It is essential to ensure the gate openers are mounted horizontally, especially in the "CLOSE," "OPEN," and "45° angle" positions. When welding the bracket to the gate leaf, the gate opener should be covered to prevent damage from sparks.

The wire connection involves connecting the white wire to positive (+) and yellow wire to negative (-) for the motor, and similarly for the other motor. It is important to avoid tension in the cable during the open and close phases and always connect the grounding wire (GND).

The emergency release mechanism is a crucial safety feature. For the left motor, the process involves inserting the release key into the slot, turning it anti-clockwise, pulling out the release bar, and then turning the key clockwise to fix the release bar in the pulled-out position. The turning direction is reversed for the right motor.

Maintenance Features:

Regular maintenance is vital for the system's performance and longevity. The manual recommends conducting maintenance operations at least every six months, or more frequently if the system is used intensively.

Maintenance steps include:

Disconnecting the power supply:
- Clean and lubricate the screws, pins, and hinges with grease.
- Check that all fastening points are properly tightened.
- Ensure wire connections are in good condition.
Connecting the power supply:
- Check the power adjustments.
- Verify the function of the manual release.
- Test the function of photocells or other safety devices.

The TERRIER SERIES SWING GATE OPENER is built with durability in mind, using solid materials for lasting usage. It features a 24V low voltage power supply for enhanced safety. The manual release device is designed for easy use and high protection. The worm gear application contributes to silent operation, and the system is designed for easy installation and a user-friendly interface.

TMT AUTOMATION INC. stresses that it will not be liable for any injury, damage, or claim resulting from improper use or installation of this system. Therefore, adherence to the instructions provided in this manual is paramount.

EasyGate TERRIER Series - Page 2

Table of Contents

Related product manuals