EasyManua.ls Logo

EasyGate Terrier 200 User Manual

EasyGate Terrier 200
18 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
1
Installation Guide by EasyGate for
Terrier Swing Gate System
Question and Answer IconNeed help?

Do you have a question about the EasyGate Terrier 200 and is the answer not in the manual?

EasyGate Terrier 200 Specifications

General IconGeneral
BrandEasyGate
ModelTerrier 200
CategoryGate Opener
LanguageEnglish

Summary

Installation Notes

Product Unpacking and Inspection

Verify all components are present and in good condition upon delivery.

Control Board Powering and Wiring

Remote and Keypad Pairing Procedures

System Learning and Configuration

Double Gate System Learning

Steps to configure the system for double gate operation.

Single Gate System Learning

Steps to configure the system for single gate operation.

Dip Switch Configuration Overview

SW2: Delays, Deceleration & Speed

Sets gate delays, motor deceleration, and operating speed.

Troubleshooting: Power and Basic Operation

No Power on Control Board

Diagnosing and resolving power supply issues for the control board.

Single Arm Activation Failure

Troubleshooting why a single gate arm is not responding.

Troubleshooting: Remotes, Keypads & Indicators

Remotes/Keypads Not Working

Resolving issues with remote or keypad functionality.

Blue Light Stays On Permanently

Diagnosing issues when the blue indicator light remains constantly on.

Troubleshooting: Gate Movement & Positioning

Gates Not Opening/Closing Fully

Resolving problems with incomplete gate movement.

Gate Positioning Issues

Addressing problems with gates remaining open or partially open.

Important System Notices

Related product manuals