Need help?Do you have a question about the EasyIO FW-14 and is the answer not in the manual?
General| Model | FW-14 |
|---|---|
| Type | Controller |
| Input Voltage | 24 VAC/DC |
| Communication Protocol | BACnet, Modbus |
| Input Types | Universal |
| Output Types | Analog, Digital, Relay |
| Humidity Range | 5 to 95% RH, non-condensing |
| Weight | 200 g |
Details AC and DC power supply options and connection requirements for controllers.
Explains RS485 connection requirements, termination, and wiring topology.
General wiring diagram for the FW-28 model, showing I/O and power connections.
Provides default IP, subnet, and gateway for primary network connection.
To Next Page
