Need help?Do you have a question about the EasyIO FW-28 and is the answer not in the manual?
General| Model | FW-28 |
|---|---|
| Controller Type | Field Controller |
| Communication | Ethernet, RS-485 |
| Power Supply | 24V AC/DC |
| Protocols | Modbus TCP, Modbus RTU |
| Humidity Range | 10% to 90% non-condensing |
Details on AC/DC power supply requirements, consumption, and connection diagrams for controllers.
Overview of Input/Output configurations for FW Series models, including UI, AO, DO, Pressure Sensor, Ethernet, EIA-485.
Guidelines for RS485 connection, termination, wiring, and physical interface specifications.
General wiring diagram for the FW-28 model, showing connections for power, actuators, and sensors.
General wiring diagram for the FW-14 model, illustrating connections for power, actuators, and sensors.
General wiring diagram for the FW-08 model, showing connections for power, actuators, and sensors.
General wiring diagram for the FW-08V model, illustrating connections for power, actuators, and sensors.
Step-by-step guide to restore the controller to factory default settings using the Service button during boot-up.
To Next Page
