Easymax N - Maintenance And Troubleshooting; Installing Batteries

42
Chapter 5: Maintenance and Troubleshooting
Installing Batteries
The meter uses two alkaline 1.5V (AAA) batteries. Batteries will normally last for
more than 2000 tests. Other types of 1.5V (AAA) batteries are also acceptable, but
the capacity of test times may differ. Install the batteries when you first use the
meter or replace with new batteries when the "LP" (low power) message and the low
battery symbol appear on the display.
The meter will not turn on the first time batteries are installed.
Please press and hold “S” button or insert the test strip to turn your meter on.
The meter will turn off automatically. Or you can press and hold “S” button to turn
your meter off.
Low batter
y
s
y
mbol
Note:
1. The meter won’t delete earlier records after you replace batteries.
2. You should reset the time and date again after you replace the batteries.
3. 1.5V (AAA) x 2 batteries are available at most stores. You may take the old batteries with you
for replacement.
4. Remove batteries when
y
ou will not be usin
g
the meter for one month or more.