Need help?Do you have a question about the Easymax MU and is the answer not in the manual?
Step-by-step instructions for correctly inserting batteries into the blood glucose meter.
Guides users on how to set the current time and date on the EASYMAX® MU meter.
Provides instructions and precautions for the proper use of EASYMAX® MU blood glucose test strips.
Step-by-step instructions for conducting a control solution test using the EASYMAX® MU meter.
Detailed instructions on how to load a lancet into the lancing device for blood sampling.
Step-by-step guide for performing a blood glucose test using fingertip blood samples.
Instructions for performing blood glucose tests using blood samples from the forearm.
Detailed steps for conducting blood glucose tests using blood samples from the palm.
Explains common error messages and provides troubleshooting steps for the meter.
General| Blood Sample | Capillary whole blood |
|---|---|
| Memory | 200 test results with time and date |
| Battery | One 3.0V CR2032 button cell |
| Operating Humidity | 10-90% RH |
| Hematocrit Range | 30-55% |
| Measuring Range | 20-600 mg/dL |
| Battery Life | Approximately 1000 tests |
| Operating Temperature | 10-40°C (50-104°F) |
| Operating Conditions | 10-40°C, 10-90% RH |
To Next Page
