41
Cleaning Your Meter
Caring for your EASYMAX
®
MU SMBG system does not require special cleaning. Please keep the meter free
of dirt, dust, bloodstain, and water stains. Follow these guidelines carefully to help you get the best
performance possible:
Cleaning Your Lancing Device
To clean the lancing device, wipe it with a soft cloth dampened with water and mild detergent.
DO NOT places the entire device under water.
To disinfect the cap after cleaning, place it in 70%-75% rubbing alcohol for 10 minutes at least once a
week. Allow the cap to air-dry after disinfecting.
Do Not:
Get any moisture in the test strip slot.
Spray any cleaning solution directly onto
the meter.
Put the meter under water or liquid.
Pour liquid into the meter.
Do:
Make sure the meter is turned off.
Gently wipe the meter’s surface with a soft
cloth slightly dampened with ethanol
(70~75%).
To Next Page
Loading...
