Easypix GoXtreme User Manual

48
5.4 RF Watch Remote Control
Before using the RF watch remote control, you must pair it with the
camera.
Do the following to pair your RF watch remote control.
1. On the camera, press the Mode button repeatedly to
change to SET mode.
2. Press the Shutter button to enter SET mode.
3. Press the Mode button to highlight MORE.
4. Press the Shutter button to enter the MORE menu.
5. Press the Mode button to highlight BINDING.
6. Press the Shutter button to enter the BINDING
submenu.
7. The camera RF antenna is enabled and ready to be paired
with the RF watch remote control.
8. On your RF watch remote control, press the MODE
button to switch to Preview mode. Then press and hold
the SET button to enter to SET mode.

Easypix GoXtreme Specifications

General

Brand	Easypix
Model	GoXtreme
Category	Digital Camera
Language	English