Eaton 600 A 15 kV class push-OP Installation And Operation Instructions

34 OPERATION AND INSTALLATION INSTRUCTIONS MN280075EN July 2018
Form 6 microprocessor-based rack-mount recloser control
Figure29. Connect double rack mount controls with #10-24 screws
Single rack mount option handle attachment
instructions
These instructions apply to the attachment of the handles to
the Form 6 Single Rack Mount Recloser Control (Figure30).
The control is shipped without the handles attached. Follow
this procedure to attach the handles to both sides.
1. Orient the handles as illustrated in Figure30.
2. Attach the two handles (Item 2) to the control using six
#10-32 Flat Head Screws (Item 3).
ote:N Three screws will be used for each handle.
3. Tighten all hardware completely. Do not torque.
Table13. Form 6 Recloser Control Single Rack Mount
Accessory Handle Attachment Parts List (Figure30)
Item Description Part Number Quantity
1 Form 6 Rack Mount
Control 1
2 Form 6 Handle 6A00163901 2
3 #10-32 Flat Head
Screw 722915310050A 6

Eaton 600 A 15 kV class push-OP Specifications

General

Brand	Eaton
Model	600 A 15 kV class push-OP
Category	Cables and connectors
Language	English