Need help?Do you have a question about the Eaton 9SX 6000VA and is the answer not in the manual?
General| Capacity | 6000 VA |
|---|---|
| Output Power | 5400 W |
| Input Voltage | 200-240 VAC |
| Output Voltage | 200-240 VAC |
| Output Frequency | 50/60 Hz |
| Topology | Double Conversion Online |
| Form Factor | Tower |
| Input Frequency Range | 40-70 Hz |
| Output Voltage Regulation | ± 1% |
| Transfer Time | 0 ms |
| Display | LCD |
| Operating Temperature | 0 to 40 °C |
| Battery Type | Sealed Lead Acid |
| Communication | USB, Serial |
| Output Frequency Regulation | ±0.1 Hz |
| Typical Recharge Time | 3 hours to 90% |
Details the safety and EMC standards the equipment complies with, including IEC/EN and FCC.
Explains common symbols used in the manual for warnings and important information.
Provides critical safety precautions for handling the UPS and its components.
Outlines essential safety guidelines for installation and operation of the UPS.
Details specific handling procedures, battery care, and service personnel requirements.
Describes Eaton's environmental approach, including eco-design and substance compliance.
Illustrates tower and rack installation methods for the UPS and EBM models.
Details the connectors and ports available on the rear of the 9SX and 9PX UPS models.
Lists optional accessories for the UPS, such as network cards and rack kits.
Describes the five-button control panel and graphical LCD for UPS operation.
Explains the status information displayed on the UPS LCD screen and its indicators.
Details how to navigate menus and access information using the UPS control buttons.
Lists user-configurable settings for language, LCD, alarms, and operational parameters.
Guidance on checking for shipping damage and battery recharge status.
Instructions for safely unpacking the UPS unit and its packaging.
Verifies that all included accessories for the UPS are present.
Step-by-step guide for connecting Extended Battery Modules to the UPS.
Referral to specific manuals for connecting other UPS accessories.
Instructions for installing the UPS in a vertical (tower) configuration.
Procedure for mounting the UPS unit into a standard 19-inch rack.
Specifies required upstream protection and cable cross-section details.
Details how system earthing affects installation and galvanic isolation.
Guidance on removing the cover and preparing the terminal blocks for wiring.
Step-by-step instructions for connecting input and output power cables.
Procedures for starting and stopping the UPS unit correctly.
Explains the different operating modes: Online, Battery, Bypass, and Standby.
Instructions on how to switch the UPS between Online, Bypass, and Battery modes.
How to configure the UPS for operation in High Efficiency (HE) mode.
Options for customizing Bypass mode behavior and interrupt times.
Settings for automatic battery testing, low battery warnings, and deep discharge protection.
How to access and view the recorded events from the UPS.
How to access and view the recorded faults from the UPS.
Provides a detailed list of models, power ratings, dimensions, and electrical characteristics.
A guide to identifying and resolving common alarms, faults, and conditions.
Procedure for muting audible alarms and the conditions for their recurrence.
Information on contacting support, required details for service, and warranty.
To Next Page
