Eaton CDAU-01/04 - Declaration of Conformity; Product Compliance Statement; Covered Directives and Standards

4
Affixing date of CE mark:
2015
Doc.Id.:
CDAU-01/04.. (contains RF-Modul CSCZ-01/xx)
Senior Vice President Director Quality
General Manager & EHS
Friedrich Schröder
Fernando Ceccarelli
Declaration of Conformity
We, EATON Industries (Austria) GmbH
3943 Schrems, Eugenia 1
Austria
declare that product (family)
Eaton - Dimming actuator,
CDAU-01/04.. (contains RF-Modul CSCZ-01/xx)
(the declaration of conformity applies to all
listed types within our actual product catalog)
provided that it is installed, maintained and used in the
application intended for, with respect to the relevant manufacturers
instructions, installation standards and “good engineering practices”
complies with the provisions of Council directive(s):
Low Voltage Directive 2006/95/EC
EMC Directive 2004/108/EC
Radio and Telecommunications Terminal Equipment 99/05/EC
RoHS Directive 2011/65/EU
based on compliance with following standard(s):
EN50491-5-1/10, EN50491-5-2/10, EN60669-2-1/10,
EN50428/05+A1/07+A2/09, EN55015/13, EN61547/09
covered by RF-Modul CSCZ-01/xx: EN301489-3 V1.6.1, EN300220-2
V2.4.1, EN50491-5-1/10, EN50491-5-2/10, EN60950-1/06 + A11/09 +
A1/10 + A12/11 + A2/13, EN62479/10
20.10.2015