Need help?Do you have a question about the Eaton CEAG CG-Controller and is the answer not in the manual?
General| Brand | Eaton |
|---|---|
| Model | CEAG CG-Controller |
| Category | Controller |
| Language | English |
Important safety warnings for operating the CG-Controller and emergency lighting system.
Information on safe operation of the emergency lighting system and potential hazards.
Details standards (VDE, DIN, IEC) and quality management (ISO 9001) followed.
Provides electrical and mechanical specifications including power, dimensions, and weight.
Defines the CG-Controller's purpose for monitoring and controlling CEAG safety lighting systems.
Instructions for physically mounting the device, including screw tightness and DIN rail options.
Details how to connect power (230V AC or 24V DC) and bus cables.
Steps for calibrating system clocks and entering current time/date.
Illustrates the CG-Controller's integration within the emergency lighting system architecture.
Explains the function of each key on the CG-Controller's front panel.
Describes how operational states are shown on Line 2 of the main screen.
Explains how faults are shown on Line 3, including sum failures.
Provides a general overview of the available menu structure.
Details the information displayed on the main screen, including status and fault lines.
Explains how system information is read cyclically for status and logbook updates.
Describes the behavior of the LCD backlight when keys are pressed.
Details on initiating function tests (FT) and duration tests (DT) for individual and all devices.
Procedure for cancelling an ongoing operating duration test.
Describes how to block all devices or release them from a blocked state.
Explains how to perform a manual reset on affected devices.
Guides on accessing device status, failure reports, circuit, and luminaire status.
Details the possible circuit statuses for CG2000 device types.
Details the possible circuit statuses for ZB-S device types.
Lists the priority and descriptions of circuit statuses for ZB-S devices in line 2.
Lists the priority and descriptions of circuit failures for ZB-S devices in line 3.
Describes how to view luminaire status for CG2000 devices, including circuit and name.
Describes how to view luminaire status for ZB-S devices, including circuit and name.
Details status display for DLS/TLS/3PhW modules on CG2000 devices.
Details status display for DLS/TLS/3PhW modules on ZB-S devices.
Shows sample display for charging and battery status, including voltage and temperature.
Instructions for selecting the display language for the CG-Controller.
Procedure for setting the time and date, including daylight saving adjustments.
Details on scheduling the next function test for individual or all devices.
Details on scheduling the next duration test for individual or all devices.
Explains how to configure relay settings based on system status or faults.
Lists the default relay settings and corresponding fault messages.
Describes when the relay is activated after polling.
Shows how to display the device's serial number.
Displays contact or identification information for customer service.
Instructions for activating or deactivating the device password.
Details how to enter a password for submenu access.
Describes the process of receiving a Network Identification (NID) message.
Explains the CG-Controller's role as a Master or Observer in the network.
Details how to initiate an automatic search for connected devices.
Explains messages displayed after a device search, indicating found or missing devices.
Procedure for adding a device that is already present in the system.
Procedure for adding a device that is not yet present, including NID input.
Steps to manually synchronize the clocks of all connected devices.
Lists events that trigger automatic clock synchronization.
Instructions for displaying entries from the logbook on the memory card.
Shows how to view detailed information for specific logbook events.
Procedure for irrevocably deleting the logbook entries.
Instructions for saving all system and controller configurations to the SD card.
Procedure for saving the controller's configuration to the SD card.
Procedure for loading a controller configuration from the SD card.
Steps to save the device's configuration onto the SD card.
Instructions for transferring a device configuration from the SD card to the device.
Procedure for reading text data from devices and saving it to the SD card.
Instructions for sending text data from the SD card to the device.
Steps to test and accept a new CG-Controller configuration from PC software.
Procedure for automatically reading configuration data from the SD card.
How to automatically find network devices.
Procedure for saving configuration data to the SD card.
Process of transferring text data to a network device.
Process of transferring network configuration data to a device.
How to cancel a data download process (configXX, texteXX).
Confirmation of the successful completion of a download process.
Explains the meaning of LED indicators for 'Ready for operation', 'Test mode', and 'Failure'.
Provides a table correlating operational states with LED indicators.
Instructions for configuring devices using the SD card.
Procedure for reading device configurations and saving them to the SD card.
Describes how logbook entries are retrieved and saved.
Details the layout and structure of logbook files on the SD card.
Explains the content of configuration and text files stored on the SD card.
Illustrates data flow between PC, CG-Controller, SD card, and network systems.
To Next Page