Eaton CEAG CG-Controller - Clock Synchronization; Manual Clock Synchronization; Automatic Clock Synchronization; Memory Card Operations

28
Manual CEAG CG-Controller for CG 2000/ZB-S 30080001458 (C) July 2016 www.ceag.de
9 Menus
9.9.3 Synchronising clocks
A precondition for synchronising the clocks of all emergency
lighting systems is that at least one emergency lighting system
must be logged in on the CG-Controller.
9.9.3.1 Initiating synchronisation manually
Line Line
1 Synchronize all devices
2 with the CG
3 controller clock n/y
4 16:06:112 29.10.2002
Operation:
Menu One menu level higher
 /  Selection in Line 3:
yes / no
 Confirm selection
9.9.3.2 Automatic synchronisation of all clocks
The clocks of all devices will automatically be synchronized to
each other for the following events:
1. After an automatic search for devices
2. After manually adding devices
3. After changing the time on the CG-Controller
4. After switching between standard and daylight savings time
5. After starting a functiontest automatically
6. After starting an durationtest automatically
7. After programming a functiontest
8. After programming a durationtest
This synchronisation takes place automatically in the background
so that no actions are required on the CG-Controller.
9.10 Memory Card
9.10.1 Display logbook
9.10.1.1 Detai led logb ook-event di s p lay
Line Selection (submenu)
1 Find device autom.
2 Manually add/delete
3 Synchronize clock?
Line Selection (submenu)
1 Display logbook ∕
2 Delete logbook
3 All devices -> SD
4 Contr.cong.->SD
5 Contr.cong.<-SD
6 Dev.cong.->SD
7 Dev.cong.<-SD
8 Text -> SD
9 Text<-SD
Line Sample display:
1 13.08.2002 17: 1 5:26
2 No.:12345 dev.: XX
3 Event
4    Selection
Operation:
Menu One menu higher
 previous event
vorheriges Ereignis
 last event
 first event
 detailed event-display
Line Sample display:
1 Luminaire failure DC
2 Circuit: 06
3 1....5....0....5....2
4 – – – – – – – – – – – – – –
Operation:
Menu One menu higher
 Back