Eaton CGLine+ Web-Controller

Need help?

Do you have a question about the Eaton CGLine+ Web-Controller and is the answer not in the manual?

Summary

Safety notes

Cybersecurity

Guidelines for secure deployment and minimizing cybersecurity risks to the installer system.

Installation

Assembly

Electrical connections, push buttons and LED displays

Details on wiring, push buttons, and status indicators for the CGLine+ Web-Controller.

Push button functions

Explains the functionality of the three push buttons on the front panel of the controller.

Connections

Details on various connection types: power, CGLine+ bus, RS485, LAN, and blocking input.

First commissioning and modifying network settings

Factory default network settings

Preparing the PC for configuration

Steps required to set up a PC, including network settings, for device configuration.

First access to the CGLine+ webserver

Procedure for accessing the CGLine+ Web-Controller's web interface and handling security warnings.

Login to the CGLine+ webserver

Steps for logging into the web interface using administrator credentials.

Modifying of the language, date and time

Modifying of the network settings

Detailed steps to configure network parameters like IP address, subnet mask, and gateway.

Common operation of the web screens

Overview of all faulty luminaires (complete overview)

Overview of all faulty luminaires for each zone

Configuration change of luminaires addresses

Step-by-step guide to modify luminaire addresses and configurations.

Switching command screen

Device information screen

Configuration screen test times

Digital input;output configuration screen

General device settings

Network (settings)

Configuring network parameters like IP, subnet, gateway, and DNS.

Configuration of E-mail

Logbook

Building layout - basic view

Layout programming - searching for a device

Multi-site configuration

Overview all Web-Controller