Eaton CGLine+ Web-Controller User Manual

27
7 Common operation of the web screens
Installation and Operating Instructions CGLine+ Web-Controller 40071860236 (E) February 2019 www.eaton.com
7.23 Multi-site configuration
To display the CGLine+ Web-
Controller with status in the
menu “Overview all Web-
Controller”, the IP addresses
of the devices must be
entered.
1
2
: The IP address to must
be entered here. After con-
firming via “Add”, the devices
are automatically created.
A device can be deleted
from the list again via
“Delete”.
3
3
1
2
7.24 Overview all Web-Controller
With several installed
CGLine+ web controllers in
the network, all devices can
be displayed clearly with
status display in a list
1
.
For this purpose the devices
must be registered and
entered a single time, see
above.
Status display of zones,
inputs and outputs of all
CGLine+ web controllers
installed in the network.
2
CGLine+ web controllers
installed in the network
1
2

Eaton CGLine+ Web-Controller Specifications

General

Brand	Eaton
Model	CGLine+ Web-Controller
Category	Controller
Language	English