Do you have a question about the Eaton xComfort CTAA-01/04 and is the answer not in the manual?
Product name | Eaton xComfort CTAA-01/04 |
---|---|
Category | Controller |
Power Supply | 230 V AC |
Protection Class | IP20 |
Input Voltage | 230 V AC |
Frequency | 50/60 Hz |
Communication Protocol | xComfort |
Operating Temperature | 0°C to 50°C |
Relative Humidity | 5% to 85% non-condensing |
Mounting | DIN rail |
Highlights critical safety warnings and installation by qualified electricians.
Describes switching actuator, local input, and energy measurement sensor functions.
Illustrates wiring for pushbuttons/switches and hotel setups.
Specifies operating range and signal interference factors.
Step-by-step visual guide for installing the CSAU-01/01-10I(E) model.
Step-by-step visual guide for installing the CSAU-01/01-10 model.
Declares conformity of Eaton switching actuators to EU directives and standards.
Visual examples for installing CTAA series devices.
Illustrates connecting actuators to sensors and installing modules.
Details installation by specialists, fuse protection, and stress restrictions.
Lists applications where xComfort products MUST NOT be used, like safety functions.
Defines warranty conditions, liability, and consequences of non-compliance.