Need help?Do you have a question about the Eaton C441 Series and is the answer not in the manual?
General| Series | C441 |
|---|---|
| Category | Controller |
| Type | Electronic Overload Relay |
| Voltage | 24-240V AC/DC |
| Mounting | DIN Rail |
| Phase Sensitivity | 3-Phase |
| Input Voltage | 24-240V AC/DC |
| Number of Outputs | 2 |
| Protection Rating | IP20 |
| Reset Type | Manual/Automatic |
| Trip Class | 10 |
| Auxiliary Contacts | 1NO+1NC |
| Communication Protocol | Modbus RTU |
| Operating Temperature | -20°C to 60°C |
| Dimensions | Varies by model |
Explains safety symbols and their meanings.
Details risks and precautions related to high voltage components.
Instructions for configuring the device's PROFIBUS address via DIP switches.
Details configuration parameters for C441 Motor Insight.
Lists supported configuration parameters for C440 relay.
Explains configuration parameters for the S611 Soft Starter.
Details configuration parameters for the S811+ Soft Starter.
How to set up the configuration file within Simatic software.
Process of assigning tag names to I/O addresses for the C441.
Steps for compiling and downloading the program to the S7 PLC.
To Next Page