Eaton CEAG CG-Controller User Manual

2
Manual CEAG CG-Controller for CG 2000/ZB-S 30080001458 (C) July 2016 www.ceag.de
Contents
1 Safety Instructions ............. 4
2 Important information about safety
at work and the safe operation of
an emergency lighting system ... 4
3 Conformity with standards ...... 5
4 Specifications ................. 6
4.1 Technical Data ................. 6
4.2 Use as prescribed .............. 6
5 Installation ................... 8
5.1 Assembly ..................... 8
5.2 Electrical connection ............ 8
5.3 Necessary Entries and first steps .. 9
6 CG-Controller in the emergency
lighting system ............... 9
7 Definitions of keys .............10
8 Status display and
fault display ..................11
8.1 Status display ..................11
8.2 Fault display ...................11
8.2.1 Sum failure ....................11
8.2.1.1 Example of a sum fault message ...11
8.2.1.2 Example of no sum failure
message .....................11
8.2.2 Display of additional faults in the
“Info device” menu .............11
9 Menus ...................... 13
9.1 Menu overview ................13
9.2 Main screen ...................13
9.2.1 Jump back to the main screen
automatically ..................13
9.2.2 Cyclic data reception of emergency
lighting systems ................13
9.2.2.1 Conditions for switching off
cyclic data reception ............13
9.2.3 LCD back lighting ...............13
9.3 Main menu ....................13
9.4 «Test» menu ...................15
9.4.1 Starting the functiontest FT or
durationtest DT for individual
devices ......................15
9.4.2 Starting the functiontest FT or
durationtest DT for all devices .....15
9.4.3 Cancelling the operating
duration test ...................15
9.5 «Block/reset» menu .............16
9.5.1 Block / reset ...................16
9.5.2 Manual reset ..................16
9.6 «Info device» menu (submenu 1) ..17
9.7 Info device (submenu 2). . . . . . . . . .17
9.7.1 Circuit status
(device type=CG2000) ...........17
9.7.2 Circuit status (device type=ZB-S) ...17
9.7.2.1 Circuit status of ZB-S in line 2 .... 18
9.7.2.2 Circuit failure of ZB-S in line 3 .... 18
9.7.3 Luminaire status
(device type=CG2000) ...........19
9.7.4 Luminaire status
(device type=ZB-S) ..............19
9.7.5 DLS/TLS/3PhW-status
(device type=CG2000) .......... 20
9.7.6 DLS/TLS/3PhW-status
(device type=ZB-S) ............. 20
9.7.7 Charging-/bat.status ............ 20
9.8 «Setup CG-Controller» menu ..... 21
9.8.1 Select language ............... 21
9.8.2 Time and date ................ 21
9.8.2.1 Switching to daylight
savings time ................. 21
9.8.2.2 Switching back to standard time .. 21
9.8.3 Next FT ..................... 22
9.8.3.1 Next FT safety function ......... 22
9.8.4 Next BT ..................... 22
9.8.4.1 Next DT safety function ......... 22
9.8.5 Relay settings. . . . . . . . . . . . . . . . . 23
9.8.5.1 Activation time of relay ......... 23
9.8.5.2 Default relay setting ............ 24
9.8.6 Serial number ................. 24
9.8.7 Customer Service Information .... 24
9.8.8 Password .................... 24

Eaton CEAG CG-Controller Specifications

General

Brand	Eaton
Model	CEAG CG-Controller
Category	Controller
Language	English