Eaton CEAG CG-Controller User Manual

3
Manual CEAG CG-Controller for CG 2000/ZB-S 30080001458 (C) July 2016 www.ceag.de
Contents
9.8.8.1 Activate password ............. 24
9.8.8.2 Deactivate password ........... 24
9.8.8.3 Activate submenu password ..... 24
9.8.8.4 Menu password inquiry ......... 25
9.8.9 NID receive .................. 25
9.8.9.1 Waiting for a service
request message .............. 25
9.8.9.2 Service Request Message
received ..................... 25
9.8.10 Network Master ............... 25
9.9 «Setup device» menu .......... 26
9.9.1 Find devices autom. ............ 26
9.9.1.1 «Searching for device» message
(CG-Controller type=CG2000) .... 26
9.9.1.2 «Searching for device» message
(CG-Sontroller type=ZB-S) ....... 26
9.9.1.3 «Device found» message ....... 26
9.9.1.4 «Device not found» message .... 26
9.9.1.5 Error analysis for Finding
device autom. ................ 27
9.9.2 Adding/deleting manually
(device type=CG2000/ZB-S) ...... 27
9.9.2.1 Device already present ......... 27
9.9.2.2 Device not yet present .......... 27
9.9.3 Synchronising clocks ........... 28
9.9.3.1 Initiating synchronisation
manually ..................... 28
9.9.3.2 Automatic synchronisation
of all clocks .................. 28
9.10 Memory Card ................. 28
9.10.1 Display logbook ............... 28
9.10.1.1 Detailed logbook-event display ... 28
9.10.2 Delete logbook ................ 29
9.10.3 All devices -> SD. . . . . . . . . . . . . . . 29
9.10.4 Saving the controller configuration
(Contr. config.→ SD) ........... 29
9.10.5 Loading the controller configuration
(Contr. config.→ SD) ........... 29
9.10.6 Saving the device configuration
in the CG-Controller to SD
(dev. config. → SD) ............ 30
9.10.7 Sending a device configuration
from theCG-Controller to
the device (dev. config. → SD) .... 30
9.10.8 Reading texts from the device
and saving to SD (Text → SD) .... 31
9.10.9 Sending texts from the
CG-Controller to the device
(Text → SD) .................. 31
10 CG-Controller configuration
created from PC software ...... 32
10.1 Read new configcg.dat from SD
automatically ................. 32
10.2 Find devices automatically ....... 32
10.3 Save Configcg.dat to SD ........ 32
10.3.1 Network device configuration
created fromPCsoftware ....... 32
10.3.1.1 Transfer text to the device ....... 33
10.3.1.2 Transfer network configuration
to the device ................. 33
10.3.1.3 Cancel the download process
(configXX, texteXX/CG 2000) ..... 33
10.3.1.4 Ending the download
(configXX, texteXX/CG 2000) ..... 33
11 LED displays ................. 34
11.1 LED indicators
“Ready for operation”
“Test mode” and “Failure” ....... 34
11.1.1 Control module (LED displays) .... 34
11.1.1.1 Ready for operation ............ 34
11.1.1.2 Test mode ................... 34
11.1.1.3 Failure ...................... 34
12 Secure-Digital-Memory Card SD 34
12.1 Device configurations .......... 34
12.1.1 Configuring devices withSD ..... 34
12.1.2 Reading the device configuration
and saving to SD .............. 34
12.2 Logbook ..................... 34
12.2.1 Layout of the logbook .......... 35

Eaton CEAG CG-Controller Specifications

General

Brand	Eaton
Model	CEAG CG-Controller
Category	Controller
Language	English