Need help?Do you have a question about the Eaton DX 1000 LAN and is the answer not in the manual?
General| Input Voltage | 230 V |
|---|---|
| Output Voltage | 230 V |
| Output Frequency | 50/60 Hz |
| Number of Outlets | 8 |
| Topology | Line-Interactive |
| Battery Type | Sealed lead-acid (SLA) |
| Typical Recharge Time | 4-6 hours |
| Outlets | IEC 320 C13 |
| Communication Ports | USB, RS-232 |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -15-45°C |
| Humidity | 0-95% non-condensing |
Guidelines for safe UPS installation, including environmental considerations and wiring.
Safety precautions during UPS operation, including handling live voltage and input cord.
Critical safety instructions for UPS maintenance, focusing on electrical hazards and battery handling.
Overview of the UPS's double-conversion technology and operational capabilities.
Details on various operating modes like Line, Battery, Bypass, and ECO, with LCD indicators.
Explanation of common symbols and icons used on the UPS display and in the manual.
Description of the front panel components, including buttons and the LCD display.
Details on what the different displays and indicators on the UPS LCD screen represent.
Explanation of the functions of the ON, OFF, Select, and Enter buttons on the UPS.
Diagrams and labels for the ports and connectors on the rear of the UPS.
Technical specifications including model details, environmental, mechanical, and electrical ratings.
List of safety and EMC standards the UPS complies with.
Details on RS232 and USB communication ports for monitoring and software updates.
Procedure for unpacking the UPS, checking contents, and inspecting for transit damage.
Steps for installing the UPS, including wiring, circuit breaker checks, and connecting loads.
Instructions for safely connecting external battery packs to the UPS.
Guide for installing and connecting UPS management software via RS232 or USB.
Procedure for starting the UPS using the AC mains power source.
How to start the UPS using only battery power in the absence of AC input.
Guidance on connecting devices to the UPS, including overload considerations.
Information on how the UPS charges its internal and external batteries.
Information regarding battery discharge behavior and user actions.
Procedure for testing the UPS battery level and aging status.
Steps for safely shutting down the UPS from AC power.
Steps for safely shutting down the UPS using only battery power.
How to silence audible alarms on the UPS temporarily or permanently.
How to interpret and respond to warning indications from the UPS.
How to interpret and respond to critical fault indications from the UPS.
Details on the two output sockets and their configurable on/off functions.
Instructions for adjusting UPS settings like voltage, frequency, and mode using the LCD panel.
Common problems, their causes, and solutions for warning and fault indications.
Recommendations for maintaining UPS batteries to ensure longevity and performance.
Information required when contacting the service center for technical assistance.
Guidelines for safely transporting and storing the UPS unit.
To Next Page
